IPS e.max Dental Crowns | Dental Lab for NJ & NY Practices | BioDent
BioDent Dental Laboratory fabricates IPS e.max crowns and restorations for dental practices across New Jersey and New York. As a B2B-only dental lab at 31 Washington Street, Matawan, NJ 07747, BioDent partners with dentists and prosthodontists who need lithium disilicate restorations with natural translucency and precise shade matching. We accept iTero digital scans and physical impressions, produce each case in CAD/CAM-milled or pressed lithium disilicate, and deliver finished restorations directly to your NJ or NY practice.
What Are IPS e.max Crowns?
IPS e.max is a lithium disilicate glass-ceramic produced by Ivoclar that combines outstanding esthetics with reliable strength for anterior and select posterior applications. e.max crowns are fabricated either by CAD/CAM milling (e.max CAD) or by heat-pressing (e.max Press), giving dental labs flexibility across a wide range of restorative indications. The material is prized for its natural translucency and light-diffusing properties — matching adjacent teeth in a way that high-opacity materials cannot. BioDent uses IPS e.max for single crowns, veneers, inlays, onlays, and short-span anterior bridges for the practices we serve.
e.max Restorations BioDent Fabricates
| Restoration | Indication | Fabrication Method |
|---|---|---|
| e.max Single Crown | Single-tooth restoration, anterior or premolar | CAD/CAM milled or pressed |
| e.max Veneer | Minimally invasive esthetic correction, smile design | Pressed e.max |
| e.max Inlay / Onlay | Conservative posterior restoration preserving tooth structure | CAD/CAM milled |
| e.max 3-Unit Bridge | Short-span anterior bridge where esthetics are critical | CAD/CAM milled |
| e.max Implant Crown | Implant-supported single tooth in esthetic zones | CAD/CAM milled on titanium base |
e.max vs. Zirconia: Choosing the Right Material
| Factor | IPS e.max | Zirconia |
|---|---|---|
| Esthetics | Superior translucency — ideal for anterior and cosmetic cases | High-opacity; layered zirconia needed for best esthetics |
| Strength | ~400 MPa — suitable for anterior and premolar loads | 600–1200 MPa — preferred for posterior high-load cases |
| Chairside Adjustment | Easy to adjust and polish without fracture risk | Requires diamond instruments; can chip if improperly adjusted |
| Span Length | Up to 3-unit anterior bridges | Full-arch bridges and long-span restorations |
| Best Use Case | Anterior crowns, veneers, esthetic smile makeovers | Posterior crowns, bruxers, implant-supported cases |
Why Dental Practices Choose BioDent for e.max
- Local NJ lab, fast regional turnaround. Cases processed at our Matawan, NJ facility — shorter delivery times than out-of-state or overseas labs.
- Precise shade matching. Experienced ceramists match e.max to adjacent dentition using Vita and custom shading protocols.
- iTero-compatible digital workflow. Submit digital scans from any major intraoral scanner for a fully model-free e.max case.
- CAD/CAM and pressed options. BioDent fabricates both milled e.max CAD and pressed e.max Press restorations based on case requirements.
- B2B only. BioDent works exclusively with licensed dental professionals — no patient walk-ins, full focus on supporting your practice.
How to Send an e.max Case to BioDent
- Complete your Rx. Specify restoration type (crown, veneer, inlay/onlay), shade, material preference (CAD or Press), and margin design.
- Submit impressions or scans. Upload an iTero or intraoral scan file, or ship a physical impression to 31 Washington Street, Matawan, NJ 07747.
- BioDent fabricates the restoration. Our ceramists mill or press the e.max restoration, stain and glaze for shade, and inspect margins and contacts.
- Quality check. Each restoration is verified for fit, shade accuracy, contacts, and surface finish before shipping.
- Delivery to your practice. Finished e.max crown or veneer ships to your NJ or NY office, ready to seat.
Frequently Asked Questions
What is an IPS e.max crown?
IPS e.max is a lithium disilicate glass-ceramic restoration fabricated by a dental lab. It is valued for natural translucency and strength suitable for anterior and premolar restorations. BioDent fabricates e.max crowns, veneers, and bridges for NJ and NY dental practices.
How strong is e.max compared to zirconia?
e.max has a flexural strength of approximately 400 MPa, which is lower than zirconia (600–1200 MPa) but sufficient for anterior and premolar single-tooth restorations. For posterior high-load cases or bruxers, zirconia is typically recommended.
Can e.max be used for implant crowns?
Yes. BioDent fabricates e.max crowns on titanium bases for implant-supported restorations in esthetic zones. The combination provides the natural appearance of e.max with the stability of a metal-based implant connection.
Does BioDent accept digital scans for e.max cases?
Yes. BioDent is iTero compatible and accepts digital scan files from any major intraoral scanner. Digital submission eliminates impression shipping and can accelerate the overall case turnaround.
Can e.max veneers be fabricated at BioDent?
Yes. BioDent fabricates pressed IPS e.max veneers for smile design and minimally invasive esthetic correction. Send your case with shade prescription, prep design, and any digital smile design files and our ceramists handle the rest.
Where is BioDent located and which practices do you serve?
BioDent Dental Laboratory is at 31 Washington Street, Matawan, NJ 07747. We serve dental practices throughout New Jersey and New York on a B2B basis — working with general dentists, prosthodontists, and cosmetic dentists, never with patients directly.
Order e.max Restorations From BioDent
Ready to send your next e.max case to a local NJ dental lab with ceramist expertise and digital workflow? Send a case to BioDent and experience fast regional turnaround, precise shade matching, and B2B service built around your practice.
